Home > Electrovalves > AC Current
General Features:
� Controls Company solenoid�s valves are NC (normally closed), when electrical current is applied to the coil, the valve opens, allowing liquid to pass.
� Mixer: 2 inlet- 1 outlet; it receives fluids from two branches and mix them.
� Standard Voltage: 24/110/220 AC. � Frequency : 50/60 Hz.
� DC voltage (6/12/24 DC) available under special order.
� Dielectric Strength: 1500VCA - 1min.
� Insulation Grade: Class F (155�C).
� Coil Quality Standards: Insulated Copper Wire, IEC 60317-20/ NEMA NW1000-79C.
� Power: 8.2VA
� Electric shock protection: Class I y II (IEC60536).
� Insulation Material: Nylon6. PTI=250V.
� Heat and fire resistance: Category A
. � Max fluid temperature: 80�C. Suitable for potable water use.
Specification
� Max Operation Pressure: 10 kg/cm2 at 90% rated voltage.
� Min Operation Pressure: 0.18 kg/cm2 at 90% rated voltage.
� Breakdown Pressure: 35 kg/cm2.
� Minimum life operations: 25.000 cycles at 60�C water temperature.
� Filter located at threaded entrance.
� Several mountings to meet different applications.
� Outlet connection hose 12.7 mm (1/2") .
� Coils fully encapsulated with thermoplastic material (Grade 11 Polypropylene) for moisture protection and mechanical strength.
� Quick connect terminals.
� Product Quality Standard: IRAM Certificate № S-2346/003-1: IEC 60730-1/60730-2-8
Before ordering please indicate:
� Voltage and frequency
� Operation Pressure
� Flow rate required
� Mounting
Applications
� Automatic washing machines, humidity control in incubators, liquid tanks electrically controlled, metering and mixing of substances, hydraulic presses, etc.